On Sale! Tempo Tektronix Signal Scout RFM151 CATV RF Meter –

On Sale! Tempo Tektronix Signal Scout RFM151 CATV RF Meter –

Click for Product Info and Updated Pricing

Tektronix Tempo RFM151 CATV Meters

Tektronix RFM151 SignalScout DV3 Signal Level Meter
5 to 1080 MHz Frequency Range

The RFM151 provides all of the basic signal level easurement capabilities, and it also adds new spectrum analysis, ingress, and digital channel RF measurement capabilities not available in comparable products!

Includes Carrying Case & Accessories As Listed


Tempo SignalScout RFM151 CATV Meter SignalScout RFM-151 CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

The Tempo SignalScout RFM151 is a high-performance RF measurement field tool tailored for analog/digital Cable TV networks. It is designed to meet the demanding requirements of cable television technicians performing troubleshooting and maintenance operations anywhere in the network. The RFM151 provides all of the basic signal level easurement capabilities, and it also adds new spectrum analysis, ingress, and digital channel RF measurement capabilities not available in comparable products!

– Digital Channel RF Measurement Suite Includes Average Power Level Plus Noise/Distortion Measurement
– Exclusive Ingress Monitor Mode Records Ingress Violations of up to 32 User-defined Frequency and Level Windows
– Enhanced Spectrum Mode Increases Ability to Capture Lowlevel and Bursty Signals
– AM and FM Demodulators with Speaker Helps Identify Ingress Sources
– User-changeable Battery Pack with Optional External Charger for Uninterrupted Use
– CSS151 Control and Analysis Software Includes Ingress/Spectrum Analysis Capability and Report Generation

Digital Channel Average Power
The RFM151’s stepped integration method efficiently and accurately delivers the true average power of QAM, QPR, QPSK, or VSB digital channels (see Figure 1). Unlike single-point measure and calculate methods, the stepped integration technique takes into account signal abnormalities such as un-flatness.
The Peak Analog-to-Digital Average Power Level Difference measurement makes short work of verifying power loading in mixed analog and digital systems. Use it to set digital modulator levels referenced to the analog carriers.

Digital In-Channel Noise
With analog signals, carrier-to-noise ratios are important to picture quality. A similar measurement for digital signals is the Desired-to- Undesired Signal Ratio. This is an in-channel (out of service) average power-to-noise measurement that includes noise, as well as distortion signals, such as ingress and analog system-generated CSO and CTB.

Tektronix Tempo RFM151

Enhanced Spectral Analysis
The RFM151’s Spectrum Mode is an easy-to-use spectrum analysis tool that allows technicians to troubleshoot most problems before calling for more advanced equipment. Spectrum Mode Features include:
– AM and FM demodulators
– Dual markers
– Noise marker
– Window Sweep™
– Max hold
– Preamp control
– Peak/average detection

Combination AM/FM demodulators with amplifier and speaker, are available both in Meter Mode and Spectrum Mode. These detectors help the technician identify both wanted signals, such as aural carriers, and unwanted signals, such as a two-way radio transmission, and other ingress.

The General Purpose Spectrum Mode offers a choice of no markers, dual frequency-amplitude markers with D readout, or noise markers (in dB/Hz) with selectable normalized bandwidth. Other features of spectrum mode include: Window Sweep which reduces the amount of swept display, increasing the display update rate to show rapidly changing signals; Max Hold, to show only the highest value of the displayed spectrum; Selectable Peak or Average detection modes, and a preamp for making ow-level readings.

Ingress Troubleshooting
The RFM151 is the technician’s best friend when it comes to troubleshooting ingress problems. Exclusive circuitry minimizes forward-path signals overloading the RFM151’s input when measuring return-path traffic. This means that low-level ingress measurements can be taken in common path locations – such as a tap or seizure screw. Add to this the quick scan rate of Window Sweep, max hold, peak detect, demodulation, field strength, and preamp controls and the RFM151 is able to measure return-path bursty signals and low-level ingress down to –65 dBmV (–5dB?V) to help locate the source (see Figure 2).

Ingress Monitoring
Another unique RFM151 feature is the Ingress Monitor Mode which allows up to 32 frequency windows to be defined within the displayed spectrum, each with its own level threshold (see Figure 3). When a signal violates the threshold, the instrument either stops and shows the display, stores the violation in memory, or continues. Violations can be stored as frequency/amplitude/time data, or complete spectrum displays with time stamps. Sweep delays can be set from 2 to 60 minutes in one-minute intervals allowing unattended monitoring.

Level Measurement
The SignalScout provides five different level displays: Single Channel, 5-channel, Pilots, All Channels, and Meter. These display modes can show either analog or digital channel information.
The 5-channel display mode provides both a numerical reading and a bargraph display. This is great for doing system-at-a-glance measurements and looking at tilt. The Pilots display mode shows both bargraph and numeric displays of any two frequencies used for setting the AGC in the plant.
Measurement Modes
The RFM151 also performs the following measurements: Carrier-to-Noise, Hum, FM Deviation, and Field Strength. Carrier-to-Noise can be configured for either In-Service (using the guard band) or Out-of-Service (with a user-settable frequency offset). Both measurements are normalized to the proper bandwidth for the system (4MHz for NTSC and 5MHz for PAL).

The Relative Field Strength mode allows the user to select a frequency between 5 and 1080MHz and use an optional antenna to locate the signal of interest. Field Strength Mode is useful for finding leaks in the cable plant and locating the sources (see Figure 4).


Worldwide Compatibility
The RFM151 works on any world television standard and all common transmission standards. It automatically measures the average power of a NICAM sound carrier. Just enter the correct frequency into the second aural carrier slot and the RFM151 does the rest.

Customized Settings – Time-Saving Measurement Sequences
The RFM151 and CSS151 Software form a powerful tool tailored to an individual cable system. By creating automatic test sequences using the CSS151 software, test time and errors are reduced. Tests can be setup to run at fixed time intervals using the interval timer in the RFM151, or under technician control. These sequences can be used for the FCC required tests including the 24-Hour test, or just for routine maintenance.

Report Generation
Data in the worksheet can be printed directly, or processed into concise reports for hard copy files. Reports include a Status Report that shows how well the system is performing with regard to level differences between adjacent channels and minimum and maximum level differences. Another report shows the visual carrier level and visual-to-aural carrier difference over four six-hour time periods for monitoring system performance over time and temperature. Both reports can be printed with up to six lines of header text for displaying additional information.

Input Impedance – 75 W (nominal).
Connector Type – Male type F with precision female-to-female F

Range – 5 to 1080 MHz.
Accuracy – ±5 kHz or ±10–5 of tuned frequency,
which ever is greater.

Sensitivity – –35 to 60 dBmV (+25 to +120 dB?V).
Repeatability – ±0.5 dB.

Analog Channel Select Mode – Automatic or user selectable.
Accuracy – ±2 dB.

Measurement Location – User selectable.
Accuracy – ±2 dB.
Range – Up to 51 dB with carrier amplitude >5 dBmV,
modulation removed.

Measurement Location – Guard band
(»1.25 MHz below the visual carrier).
Accuracy – ±2 dB.
Range – Up to 47 dB with carrier amplitude >0 dBmV.

Measurement Location – In channel (Out of Service).
Accuracy – ±2%.

Fundamental Frequency – 50/60 Hz,
user-selectable frequency.
Range – 0 to 5%.
Accuracy – ±1%.

Accuracy – ±10% of peak deviation or
±2kHz whichever is greater.

Modes –
General Purpose (Dual/Noise/No markers).
Demod (AM, FM detectors, speaker).
Ingress Monitor
(up to 32 user-defined thresholds within a displayed spectrum).
Common Specifications –
Frequency Range: 5 to 1080 MHz.
Span/Division: 4 MHz, 2 MHz, 1 MHz, 400 kHz, 200kHz.
Resolution Bandwidth:
Span 1 MHz: 300 kHz.
Span <1MHz: 30kHz.
Sensitivity: –60 dBmV (–65 dBmV typical).
Spurious Free Dynamic Range:
20 to 1080 MHz: –50 dBc.
5 to 20 MHz: £–40 dBc.
Detection Mode: Peak or Average.
Vertical Scales: 2, 5, 10, 15 dB/Div.
Other Controls: Preamp, Max Hold.

Temperature –
Operating: 0 to +50° C (+32 to +122° F).
Non-operating: –20 to +60° C
(–4 to +140°F).
Humidity –
Operating: 5 to 95% from 0 to +50° C.
Altitude –
Operating: Up to 15,000 ft. (4,550 m).
Non-operating: Up to 40,000 ft. (12,192 m).

DC Input Range – +10 to +15 VDC.
Power Requirement – 10 W maximum.
Battery Type – User replaceable.
Battery Life – 2.75 Hr.

Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange

– Tektronix RFM151 SignalScout DV3
– Coax Cable
– Coax Cable Adapter
– AC Adapter/Charger
– RS232 PC Interface Cable
– Carrying Case w/ Strap

Buy, Sell, New, Used, Tektronix Tempo RFM151


We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List