AAATesters


ON SALE NOW!

FEATURED PRODUCTS ON SALE

On Sale! Tektronix CableScout TV220 CATV TDR Cable Tester – AAATesters.com

On Sale! Tektronix CableScout TV220 CATV TDR Cable Tester – AAATesters.com

Click for Product Info and Updated Pricing

Tektronix Tempo TV220 CATV Meters

Tektronix GreenLee CableScout TV220 Coax CATV TDR Cable Tester

The TV220 tests at a high bandwidth (it uses a 400 MHz acquisition system)

Designed specifically for CATV and coaxial cable, the TV220 applies the newest technology to provide both ease of use and coaxial cable testing performance not found in any other TDR.

Includes Carrying Case & Accessories As Listed

TV 220 TV-220

Tempo CableScout TV220 CATV Meter CableScout TV-220 CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

The TV220 delivers high performance, yet is so easy to use that little or no training is required. This leading edge TDR can test more system bandwidth and expose faults that have been previously invisible to TDR yet still an impairment to digital signals. The TV220 also introduces one-button testing.

Testing at Higher Bandwidth
Because the TV220 tests at a high bandwidth (it uses a 400 MHz acquisition system), it tests more of your system capacity. This enables users to pinpoint more faults that can cause micro-reflections which can degrade digital transmission BER. Only the TV220 has the bandwidth to enable you to find problems that may exist only at higher frequencies.

Tektronix Tempo TV220 CATV Meters

High SNR
The TV220 also has extremely high signal-to-noise ratio (SNR). Tempo proprietary circuit designs reduce the noise level so that “bumps” on the trace represent real faults, not just noise. Events that were previously difficult or impossible to find are clearly visible (because the noise is much lower) with the TV220. This means that you can clearly see faults further away.

High Resolution
High-resolution performance allows the TV220 to locate problem components in the customer drop. The TV220 uses a pulse width of only 1 ns which means the operator can clearly identify multiple events that are less than 2 feet apart. This enables the technician to tell which of two components on a cable is causing the problem, even when they are close together. This is particularly important in troubleshooting drops, because components such as splitters and ground blocks can be very close together.

TestWizard Testing
But the most innovative feature in the TV220 is TestWizard automated testing and event marking. Now, instead of meticulously setting up the TDR and then carefully interpreting the meaning of the displayed waveform, you push one button to get a high-resolution, low-noise trace, with the events clearly marked. This means substantial savings in training time and reduced time to get accurate, repeatable measurements.

The Only TDR for Digital Services
High bandwidth, high resolution, high SNR and ease of use make the TV220 the only logical choice for digital services. The TV220 tests more of the capacity of your cable, finds faults that are closer to the ends and finds faults that are closer together than any other TDR available.

TV220

CableScout TV220 Helps Solve Tough Problems
Any TDR can find a break or major problem, but what about those small nagging cable faults that keep your system from running smoothly CableScout TV220 can find those really tough-to-identify problems, and it is easy (see examples below). A high performance TDR does not have to be difficult to use. This one makes even the first time user look like a pro.

The TV220 – Designed for You
If your job is to maintain or find faults on coaxial cable, the Tempo CableScout TV220 is built for you. With the TV220, you’ll spend less time operating the instrument and more time analyzing and repairing faults.

You know the problems we’re talking about – the annoying small ones that cause a 3 dB notch near the upper end of your bandwidth. Now you can accurately locate them – fast and easy.

You get all this performance in the industry’s most rugged TDR package. Come snow, rain, heat, humidity, dead of night or untrained user, Cable Scout TV220 keeps working, because you have to.

Features:
– Excellent for Digital Services Provisioning
– Easy to Use – Anyone Can Use It
– TestWizardTM – One-button Testing
– Automatic Return Loss Measurements
– Automatic Multiple Event Marking
– High-resolution, Short Pulse Width (1 ns)
– Withstands a Two Meter Drop
– Large, Backlit, High-resolution Display (640 X 440), 7.2 in. Diagonal
– Internal Memory for 20 Waveforms and Notes
– Serial Printer Output for Stored or Displayed Waveforms

Specifications:

Test Signal Output 1/2 sine
Amplitude (into 75 Ohm)  4 V into 75 Ohm
Pulse Widths 1 ns, 5 ns, 25 ns
Output Impedance 75 Ohm
Acquisition System Bandwidth 400 MHz
TestWizard Testing Automatically marks faults. Operator choice of three levels of event marking:
– Mark largest event
– Mark three largest events
– Mark all events
Return Loss Automatic at cursor location
Resolution: ±1 dB
Input Protection ±400 VDC + peak AC up to 440 Hz, 30-second duration
Maximum Distance Range 12,000 ft. (3,658 m), depending on cable type and condition
Gain 0 to 72 dB
Distance Accuracy – (feet)  0 to 2,000 ft.: ±2 ft. ± uncertainty in Vp
2,001 to 6,000 ft.: ±3 ft. ± uncertainty in Vp
6,001 to 12,000 ft.: ±4 ft. ± uncertainty in Vp
Distance Accuracy –  (meters) 0 to 610 m: ±0.6 m ± uncertainty in Vp
610 to 1830 m: ±0.9 m ± uncertainty in Vp
1830 to 3658 m: ±1.2 m ± uncertainty in Vp
Display Resolution: 640 x 440 (281,600 pixels)
Size: 7.2 inch.
Type: high contrast LCD.
Backlight: operator switchable.
Waveform Display Resolution 0.33% of selected range, 4.5 cm (0.15 ft.) minimum.
Display Ranges Twelve display ranges from 6 ft. (1.8 m) to 12,000 ft. (3,658 m), plus single-button zoom window.
Temperature Operating: -10°C to +40°C (+11°F to +104°F)
Nonoperating: -20°C to +60°C (-4°F to +140°F)
Humidity 10% to 95% (noncondensing)
Field Usage Shock, water and dust resistant
Durability Survives drop of 2 meters (6 ft.) to concrete in standard soft case. Drip proof, dust resistant
EMI Emissions –  -EN55011, class A
-FCC Part 15, Subpart B, Class A
-EN60555-2
AC Operation Voltage Ranges: 110 V, 220 V or 240 V with appropriate AC to DC adapter
Line Frequency: 50 Hz to 60 Hz
DC Operation Voltage Range: 9 to 16 VDC @ 1 A (charging and operating)
Battery Operation Type: internal lead acid rechargeable battery
Operating Time: typically 8 hours continuous operation (backlight off)
Battery Savers (user selectable) – Shutoff: 5 to 30 minutes or disabled
Backlight: shutoff 5 to 30 minutes, disabled or always on
Dimensions:
Height
Width
Depth
Weight
24 cm (9.5 inches)
30 cm (11.5 inches)
9 cm (3.5 inches)
3 kg (6.4 lbs.)

Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange

Included:
– Tektronix TV220 CableScout Cable Tester (BC# 20247)
– (2) Coax To Coax Adapters
– TV220 Quick Reference Card
– Coax Cable
– DC Car Charger
– AC Adapter/Charger
– RS232 PC Interface Cable
– Hard Copy User Manual
– Carrying Case w/ Strap

Buy, Sell, New, Used, Tektronix Tempo TV220


Tektronix CableScout TV220 Spec Sheet


ON SALE NOW!

We Buy Test Equipment

Sell or Trade
Your Test Equipment. Fiber Optic Testers, Fusion Splicers, OTDRs, Cable Certifier Testers, CATV Meters, Site Masters, Spectrum Network Analyzers etc... $$ CASH back in your Pocket! $$ We make it Fast, Nice, & Easy!

Fill out Form to Submit Your Sell List